Rules by state

Solar and battery interconnection rules in Nevada

Nevada Rule 15 interconnection (NV Energy tariff). Every threshold below was read out of the document linked at the bottom of this page, and the same rules answer the free screening check.

Who this binds: investor owned utilities. A utility outside that list sets its own terms, so confirm who serves the address first.

Check a Nevada address free
How the size is measured: not published

The published limits here are stated in kilowatts without saying whether that is the inverter rating in alternating current or the array rating in direct current. On a system near a threshold that decides which band it lands in, so the checker asks the question rather than choosing an answer.

Size bands and what each one obliges

1 MW or less Size 0 to 1000 kW

The initial review fee is $189 and there is no supplemental review fee. Where an interconnection study is required the customer pays the actual cost of the supplemental review study.

  • $189 initial review fee
Above 1 MW Size 1000.001 to 20000 kW

Both the initial review and the supplemental review are charged at actual costs incurred.

  • Actual costs for initial and supplemental review

The screens that decide it

Ask the utility this, before you sell it

  1. Which excess energy credit tier applies to this customer? Nevada steps the credit down from 95 percent to 88, 81 and 75 percent of the retail rate in 80 megawatt increments of cumulative installed capacity, and the trigger is the date a complete application is submitted rather than the installation date. Confirm the current tier from the Commission determination and the utility monthly posting rather than assuming.
  2. Rule 15 does not state whether the nameplate rating is AC or DC. Confirm which figure will be used.
  3. Is this address served by a rural electric district, cooperative or municipal utility? Those are not public utilities in Nevada and neither this tariff nor the net metering statute reaches them.

Worth knowing before you quote

Nevada publishes no tiered insurance schedule in Rule 15. Telemetering is triggered at a net nameplate rating of 1,000 kilowatts. Initial review completes within 10 business days where the application qualifies for simplified interconnection, and supplemental review within 20 business days. The 235 megawatt hard cap from 2015 no longer exists; the current structure is a credit step down with 75 percent as the floor absent new legislation.

Source

Nevada Power Company Rule No. 15, interconnection and net metering, as filed with the Public Utilities Commission of Nevada, with Nevada Revised Statutes Chapter 704

Read and recorded 2026-09-12. Nevada has no statewide administrative interconnection rule binding all utilities. The requirements live in each utility Commission approved tariff, so this set records the NV Energy tariff, which covers the large majority of Nevada load but is not a state rule. Overton Power District, Valley Electric, Lincoln County Power and the municipals are outside the net metering statute because they are not public utilities in Nevada.

What to do with this

Check a real address

The rules below are the general case. Run the free check to see which utility serves a specific address, which tier the system lands in, and what to ask.

Run the free check
Installers: keep the answer with the job

GridProjeX holds the project from here, with every value tied to the document it came from and the utility and permit tracks run to permission to operate.

How it works for installers
Utilities: see what applicants are told

The same published rules your applicants read here are the ones your queue sees. GridProjeX is the record both sides work from.

How it works for utilities

Also from CivyxIQ, if they fit what you already do: SolarProjeX for running the crews and the jobs, and Solar Home so the homeowner can follow their own project. Neither is needed to use the checker.